1969-1970 Mustang Floor & Trunk Pan Coupe/Fastback - DII
Dynacorn
$3,798.99
Write a Review
Dynacorn
1969-1970 Mustang Floor & Trunk Pan Coupe/Fastback - DII
Complete Floor Pan Assembly in Weld-Thru Primer for 1969-1970 Coupes and Fastback Mustangs.
Stop wasting your time trying to repair that old, rusted-out floor. Upgrade to a new, complete floor pan assembly in weld-thru primer. This all-new complete floor pan is pre-assembled, coated in weld-thru primer and ready to place under your Mustangs body. The complete floor pan assembly includes floor pans, trunk pan, transition pan, rockers and rear frame rails.
Advantages of Weld-Thru Primer:
- Reduces prep time when welding new parts to new parts that are both covered in the weld thru primer
- Reduced spatter
- Lower distortion of the panels
- Superior conductive properties that help minimize high heat zone problems
- Eliminates corrosion that would form between overlapped panels or multi-layered spot welds
- Helps when welding a new panel to old metal
- Lower resistance at the weld surface allows better penetration into the denser, new steel that helps forgive an old alloy's problems with porosity and impurities
- Helps prevent resin build up between welds that can trap moisture in the old porous steel that leads to failure at the weld borders
Advantages of Weld-Thru Primer:
- Reduces prep time when welding new parts to new parts that are both covered in the weld thru primer
- Reduced spatter
- Lower distortion of the panels
- Superior conductive properties that help minimize high heat zone problems
- Eliminates corrosion that would form between overlapped panels or multi-layered spot welds
- Helps when welding a new panel to old metal
- Lower resistance at the weld surface allows better penetration into the denser, new steel that helps forgive an old alloy's problems with porosity and impurities
- Helps prevent resin build up between welds that can trap moisture in the old porous steel that leads to failure at the weld borders
About Dynacorn International
Since 1984, Dynacorn International LLC has been supplying the classic muscle car community with quality sheet metal, bright trim and molding for restorations or for just plain making your ride look its best. The quality and fit of their restoration parts is unsurpassed, their tooling is new and crisp, and their craftsmanship is superior. But Dynacorn doesn’t stop there. Their attention to detail and desire to manufacture only the finest restoration part in the industry never wanes. Dynacorn is constantly upgrading older tooling to maintain the crispness of line and the fit of parts. Additionally, Dynacorn uses only 1006 Universal grade Automotive steel in all of their stampings. Since new steel has fewer additives, the welds come out cleaner, tighter and with a lot fewer gasses being emitted than in the past. In all, your first choice for sheet metal, bright trim and molding should always be Dynacorn. Quality is what they do, so, always ask for genuine Dynacorn parts.
- Brand:
- Dynacorn
- Mfr Part #:
- 3648UWT
- Part Type:
- Floor Pan - Trunk
